Explore Similar Technologies

Dual-Material for Two-photon Printing for High-resolution, Multi-material 3D Structure Manufacturing

LLNL researchers have developed a new two-photon polymerization multimaterial resin formulation consisting of two reactively distinct polymer systems...

Direct Conversion of Air to Ammonia and Nitric Acid using Advanced Manufactured Electrochemical Reactors

LLNL researchers have developed an ammonia production method that circumvents the Haber–Bosch process altogether. The team’s research efforts...

Flow-based Volumetric Additive Manufacturing System

LLNL researchers have developed an approach to incorporate flow (either in stop-flow or continuous flow operation) to replace resin in the vial to...

Anisotropic, multi-functional polymeric microparticles additives for polymeric formulation enhancement

LLNL researchers have developed a synthetic methodology for making anisotropic polymer microparticles using a two phase high shear mixing protocol....

All Liquid Two-Photon Polymerization Resin Formulations Using Cationic Polymerization

LLNL researchers have developed a liquid two-photon polymerization (TPP) epoxy based resin formulation capable of flowing under low load, which...

Laser beam shaping for improved microstructure and defect control in laser-based metal additive manufacturing or welding processes

LLNL researchers have developed a novel system that can shape the profile of the laser beam during printing or welding.  The phase engineered approach...

Versatile Cold Spray

Contact
Description

Versatile Cold Spray (VCS) enables deposition of brittle materials, such as thermoelectrics, magnets, and insulators, while retaining their functional properties. Materials can be deposited on substrates or arbitrary shapes with no requirement to match compositions. The VCS system is low cost, easily portable, and easy to use.

VCS has been developed in a collaboration between Lawrence Livermore National Laboratory and TTEC Thermoelectric Technologies.

A cold-spray chamber is shown during deposition, with the nozzle at the top of the image and a near-full density sample being fabricated in the center. Particles of the brittle thermoelectric bismuth telluride are accelerated to more than 900 meters per second, or almost Mach 3, in inert gas and directed onto a copper surface, laying down the strips that form the basis of a functioning thermoelectric generator to harvest waste heat. Graphic by Jacob Long/LLNL