LLNL’s invention is a photopolymerizable polymer resin that consists of one or more nitrile-functional based polymers. The resin is formulated for SLA based 3D printing allowing for the production of nitrile-containing polymer components that can then be thermally processed into a conductive, highly graphitic materials. The novelty of the invention lies in (1) the photo-curable nitrile-…
Keywords
- Show all (69)
- Synthesis and Processing (17)
- Electric Grid (8)
- Materials for Energy Products (7)
- Additive Manufacturing (6)
- Carbon Utilization (6)
- Material Design (4)
- Membranes (2)
- Power Electronics (2)
- Rare Earth Elements (REEs) (2)
- Additively Manufactured (AM) Optics (1)
- Geologic Storage (1)
- Inertial Fusion Energy (IFE) (1)
- Material Characterization (1)
- Semiconductors (1)
- Simulation (1)
- Spectrometers (1)
- Structural Materials (1)
- (-) 3D Printing (4)
- (-) Direct Air Capture (2)
- (-) Magnet Compositions (1)
![Picture of SLA printed structures using 3D printable nitrile-containing photopolymer resins](/sites/default/files/styles/scale_exact_400x400_/public/2024-04/SLA%20printed%20structures%20using%203D%20printable%20nitrile-containing%20photopolymer%20resins.jpg?itok=cVxxoNNY)
![Flue Gas Emissions a Major Source of Atmospheric CO2](/sites/default/files/styles/scale_exact_400x400_/public/2024-03/Flue%20Gas%20Emissions.png?itok=lEpvzK0P)
This invention solves a limitation in the current practice of adding hydroxyl functional groups to the aminopolymer through the use of an alternative synthetic approach. The novelty of our approach is to produce new structurally modified relatives of common aminopolymers (PEI and PPI) as well as new functionalized materials in which the hydroxyl groups are tethered to a carbon in the backbone…
![Picture of interlocked electrode structure with metal plated surfaces](/sites/default/files/styles/scale_exact_400x400_/public/2024-03/Interlocked%20electrode%20structure%20with%20metal%20plated%20surfaces.jpg?itok=1A_mLJdP)
LLNL researchers have developed a fabrication process for creating 3D random interdigitated architectures of anodes and cathodes, eliminating the need for a membrane to separate them. This approach is similar to the repeating interdigitated multi-electrode architectures that also were developed at LLNL.
![Printed TPMS membrane structures using nanoporous photoresist](/sites/default/files/styles/scale_exact_400x400_/public/2023-12/Printed%20TPMS%20membrane%20structures.png?itok=siH1EwC9)
LLNL researchers have developed novel advanced manufactured biomimetic 3D-TPMS (triply periodic minimal surface) membrane architectures such as a 3D gyroid membrane. The membrane is printed using LLNL's nano-porous photoresist technology. LLNL’s 3D-TPMS membranes consist of two independent but interpenetrating macropore flow channel systems that are separated by a thin nano-porous wall. 3D-…
![Electrodeposition of Zn onto 3D printed copper nanowire (CuNW)](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/ElectrodepositionofZnon3dprintedCuNW.jpg?itok=2G2D1kt9)
Improving the active material of the Zn anode is critical to improving the practicality of Zn-MnO2 battery technology. LLNL researchers have developed a new category of 3D structured Zn anode using a direct-ink writing (DIW) printing process to create innovative hierarchical architectures. The DIW ink, which is a gel-based mixture composed of zinc metal powder and organic binders, is extruded…
![Microcapsules offer high surface area and a superior delivery system.](/sites/default/files/styles/scale_exact_400x400_/public/2020-11/Figure1IDEA.jpg?itok=9pdFUISw)
This invention describes a multiple nozzle microfluidic unit that allows simultaneous generation streams of multiple layered coaxial liquid jets. Liquids are pumped into the device at a combined flow rate from 100 mL/hr to 10 L/hr. Droplets are created with diameters in the range of 1 µm to 5 mm and can be created with 1-2 shell layers encapsulating fluid. Droplets created from the system can…
![permanent_magnets.png permanent_magnets](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/permanent_magnets.png?itok=WkORcUn0)
LLNL uses the additive manufacturing technique known as Electrophoretic Deposition to shape the source particle material into a finished magnet geometry. The source particle material is dispersed in a liquid so that the particles can move freely. Electric fields in the shape of the finished product then draw the particles to the desired location to form a “green body”, much like an unfired…