LLNL researchers have developed a TDLAS-based, standalone, real-time gas analyzer in a small form-factor for continuous or single-point monitoring. The system can analyze multiple gases with ultra-high sensitivity (ppm detection levels) in harsh conditions when utilizing wavelength-modulation spectroscopy (WMS).
Keywords
- Show all (61)
- Sensors (15)
- Electric Grid (8)
- Carbon Utilization (6)
- Ground Penetrating Radar (4)
- Materials for Energy Products (4)
- Defense Technologies (3)
- Additive Manufacturing (2)
- Direct Air Capture (2)
- National Security Forensics (2)
- Power Electronics (2)
- Synthesis and Processing (2)
- Geologic Storage (1)
- Imaging Systems (1)
- Inertial Fusion Energy (IFE) (1)
- Membranes (1)
- Semiconductors (1)
- Simulation (1)
- (-) 3D Printing (2)
- (-) Spectrometers (2)
- (-) Photoconductive Semiconductor Switches (PCSS) (1)
![Picture of interlocked electrode structure with metal plated surfaces](/sites/default/files/styles/scale_exact_400x400_/public/2024-03/Interlocked%20electrode%20structure%20with%20metal%20plated%20surfaces.jpg?itok=1A_mLJdP)
LLNL researchers have developed a fabrication process for creating 3D random interdigitated architectures of anodes and cathodes, eliminating the need for a membrane to separate them. This approach is similar to the repeating interdigitated multi-electrode architectures that also were developed at LLNL.
![Diffuse discharge circuit breaker with latching switch](/sites/default/files/styles/scale_exact_400x400_/public/2024-02/Diffuse%20discharge%20circuit%20breaker.png?itok=qWpciEtY)
A thyristor will stay conducting until the current through the device is zero (“current zero”) or perhaps slightly negative. LLNL’s approach is to use the opticondistor (“OTV”) to force this current zero in order to force the device into an “off” state. By combining a light-activated thyristor with an OTV, a noise-immune, high efficiency, high-power switching device can be constructed. The…
![Electrodeposition of Zn onto 3D printed copper nanowire (CuNW)](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/ElectrodepositionofZnon3dprintedCuNW.jpg?itok=2G2D1kt9)
Improving the active material of the Zn anode is critical to improving the practicality of Zn-MnO2 battery technology. LLNL researchers have developed a new category of 3D structured Zn anode using a direct-ink writing (DIW) printing process to create innovative hierarchical architectures. The DIW ink, which is a gel-based mixture composed of zinc metal powder and organic binders, is extruded…
![Graphic of NMR](/sites/default/files/styles/scale_exact_400x400_/public/2020-05/graphic_of_nmr.png?itok=b2_MNmdk)
There are prominent technical challenges arising from spinning a battery on the order of kilohertz as required by magic angle spinning in order to obtain spectral resolution that are addressed and enable operando solid-state NMR. The operando NMR measurement allows for continuous monitoring of the battery components and of potential metastable states that may exist during…