LLNL researchers have devised a set of design principles that facilitates the development of practical TPMS-based two fluid flow reactors.; included in the design are these new concepts:
Keywords
- Show all (105)
- Instrumentation (39)
- Synthesis and Processing (17)
- Diagnostics (13)
- Materials for Energy Products (6)
- Therapeutics (5)
- Additive Manufacturing (4)
- Brain Computer Interface (BCI) (4)
- 3D Printing (2)
- Membranes (2)
- Rare Earth Elements (REEs) (2)
- Vaccines (2)
- Additively Manufactured (AM) Optics (1)
- Material Characterization (1)
- Polymer Electrodes (1)
- (-) Material Design (4)
- (-) Magnet Compositions (1)
- (-) Structural Materials (1)
Technology Portfolios
![Potential reactor configurations with printed TPMS scaffolds](/sites/default/files/styles/scale_exact_400x400_/public/2023-12/Reactor_Config_with_TPMS_scaffolds.png?itok=stDW7Z7n)
![Filled (8,8) (left) and (15,15) (right) CNTs with [EMIM+][BF4- ] using SGTI with the proposed spliced soft-core potential (SSCP) approach](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/Filled%20CNTs%20using%20SGTI.png?itok=Dy0ObN7i)
LLNL researchers have developed a novel simulation methodology using slow growth thermodynamic integration (SGTI) utilizing spliced soft-core interaction potential (SSCP). The approach to filling the molecular enclosures is a nonphysical one. Rather than filling the pores from the open ends this method creates steps in the algorithm that allow molecules to pass through the pore wall and…
![The addition of initiator affects the crossover point of the storage modulus (solid line) and the loss modulus (dashed lined), which indicates curing. As initiator content increases, the reaction proceeds more quickly.](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/Curing%20polysiloxanes.png?itok=5-KLxrp2)
The approach is to use peroxides to modify the reaction kinetics in the production of polysiloxanes. A radical initiator in the presence of a hydride-terminated polysiloxane will increase the rate of curing and reduce manufacturing costs. At a minimum a formulation would contain a hydride-terminated polysiloxane, a platinum catalyst, and an initiator that generates radicals. The content of…
![permanent_magnets.png permanent_magnets](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/permanent_magnets.png?itok=WkORcUn0)
LLNL uses the additive manufacturing technique known as Electrophoretic Deposition to shape the source particle material into a finished magnet geometry. The source particle material is dispersed in a liquid so that the particles can move freely. Electric fields in the shape of the finished product then draw the particles to the desired location to form a “green body”, much like an unfired…
![Nanoporus gold](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/nanoporus%20gold%20875x500.jpg?itok=A0gFmVPT)
By combining 3D printing and dealloying., researchers at LLNL have developed a method for fabricating metal foams with engineered hierarchical architectures consisting of pores at least 3 distinct length scales. LLNL’s method uses direct ink writing (DIW), a 3D printing technique for additive manufacturing to fabricate hierarchical nanoporous metal foams with deterministically controlled 3D…
![energy_absorbing_material.jpg energy_absorbing_material](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/energy_absorbing_material.jpg?itok=UxNZ6nWH)
To overcome limitations with cellular silicone foams, LLNL innovators have developed a new 3D energy absorbing material with tailored/engineered bulk-scale properties. The energy absorbing material has 3D patterned architectures specially designed for specific energy absorbing properties. The combination of LLNL's capabilities in advanced modeling and simulation and the additive…