LLNL researchers have designed and produced, both conductive and non-conductive porous electrode components manufactured for improved metal deposition, discharging, and fluid dynamics in hybrid flow batteries. This is achieved through Direct Ink Writing (DIW) additive manufacturing. The engineered 3D electrodes enable uniform current distribution and even metal deposition during charging…
Keywords
- Show all (75)
- Imaging Systems (9)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Electric Grid (8)
- Carbon Utilization (6)
- Semiconductors (6)
- Materials for Energy Products (4)
- Optical Switches (4)
- Power Electronics (3)
- Sensors (3)
- Spectrometers (3)
- 3D Printing (2)
- Computing (2)
- Direct Air Capture (2)
- MEMS Sensors (2)
- Particle Accelerators (2)
- Synthesis and Processing (2)
- Precision Engineering (1)
- (-) Additive Manufacturing (3)
- (-) Optical Sensors (2)
- (-) Simulation (2)
![Electrodeposition of Zn onto 3D printed copper nanowire (CuNW)](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/ElectrodepositionofZnon3dprintedCuNW.jpg?itok=2G2D1kt9)
Improving the active material of the Zn anode is critical to improving the practicality of Zn-MnO2 battery technology. LLNL researchers have developed a new category of 3D structured Zn anode using a direct-ink writing (DIW) printing process to create innovative hierarchical architectures. The DIW ink, which is a gel-based mixture composed of zinc metal powder and organic binders, is extruded…
![Plasma wind](/sites/default/files/styles/scale_exact_400x400_/public/2022-08/Plasma%20wind%20.png?itok=RB5iLhMv)
![multichannel_pyrometer.jpg multichannel_pyrometer](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/multichannel_pyrometer.jpg?itok=x0sCe_BN)
LLNL researchers have designed and tested performance characteristics for a multichannel pyrometer that works in the NIR from 1200 to 2000 nm. A single datapoint without averaging can be acquired in 14 microseconds (sampling rate of 70,000/s). In conjunction with a diamond anvil cell, the system still works down to about 830K.
![Intrinsic Use Control](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/Intrinsic%20Use%20Control.jpg?itok=plVEiBwC)
LLNL's method of equivalent time sampling incorporates an embedded system that generates the pulses used to trigger the external circuit and the data acquisition (DAQ). This removes the external reference clock, allowing the overall system clock rate to change based on the ability of the embedded system. The time delays needed to create the time stepping for equivalent time sampling is done by…
![drift_meter_thumb.jpg drift_meter_thumb](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/drift_meter_thumb.jpg?itok=1NiNsyHm)
LLNL’s Optically-based Interstory Drift Meter System provides a means to accurately measure the dynamic interstory drift of a vibrating building (or other structure) during earthquake shaking. This technology addresses many of the shortcomings associated with traditional strong motion accelerometer based building monitoring.
LLNL’s discrete diode position sensitive device is a newly…
![Electronic Wave](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/electronic%20wave.jpg?itok=v7aKMJKH)
The invention relates to a measurement method and system for capturing both the amplitude and phase temporal profile of a transient waveform or a selected number of consecutive waveforms having bandwidths of up to about 10 THz in a single shot or in a high repetition rate mode. The invention consists of an optical preprocessor which can then output a time-scaled replica of the input signal to…