LLNL researchers have developed a method to enhance the performance of polyelectrolyte membranes by using a humidity-controlled crosslinking process which can be applied to precisely adjust the water channels of the membrane.
Keywords
- Show all (85)
- Synthesis and Processing (17)
- Imaging Systems (9)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Semiconductors (6)
- Additive Manufacturing (5)
- Optical Switches (4)
- Power Electronics (3)
- Sensors (3)
- 3D Printing (2)
- Computing (2)
- Electric Grid (2)
- Membranes (2)
- MEMS Sensors (2)
- Particle Accelerators (2)
- Rare Earth Elements (REEs) (2)
- Spectrometers (2)
- Precision Engineering (1)
- (-) Materials for Energy Products (6)
- (-) Material Design (4)
- (-) Optical Sensors (2)
![Potential reactor configurations with printed TPMS scaffolds](/sites/default/files/styles/scale_exact_400x400_/public/2023-12/Reactor_Config_with_TPMS_scaffolds.png?itok=stDW7Z7n)
LLNL researchers have devised a set of design principles that facilitates the development of practical TPMS-based two fluid flow reactors.; included in the design are these new concepts:
![Filled (8,8) (left) and (15,15) (right) CNTs with [EMIM+][BF4- ] using SGTI with the proposed spliced soft-core potential (SSCP) approach](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/Filled%20CNTs%20using%20SGTI.png?itok=Dy0ObN7i)
LLNL researchers have developed a novel simulation methodology using slow growth thermodynamic integration (SGTI) utilizing spliced soft-core interaction potential (SSCP). The approach to filling the molecular enclosures is a nonphysical one. Rather than filling the pores from the open ends this method creates steps in the algorithm that allow molecules to pass through the pore wall and…
![Livermore researchers support efforts to limit the need for rare-earth elements in U.S. clean-energy technologies.](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/Reducing%20Reliance%20on%20Critical%20Materials.png?itok=IuC6bH4r)
CMI—a DOE Energy Innovation Hub—is a public/private partnership led by the Ames Laboratory that brings together the best and brightest research minds from universities, national laboratories (including LLNL), and the private sector to find innovative technology solutions to make better use of materials critical to the success of clean energy technologies as well as develop resilient and secure…
![nanocomposite_aerogel.jpg nanocomposite_aerogel](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/nanocomposite_aerogel.jpg?itok=PuNPrvkg)
Livermore researchers have developed two novel TiCl4 based non-alkoxide sol-gel approaches for the synthesis of SiO2/TiO2 nanocomposite aerogels. Composite SiO2-TiO2 aerogels were obtained by epoxide-assisted gelation (EAG route) of TiCl4/DMF solution in the presence SiO2 aerogel particles. Additionally, the same TiCl4/DMF solution was employed to prepare SiO2@TiO2 aerogels by a facile one-…
![Nanoporus gold](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/nanoporus%20gold%20875x500.jpg?itok=A0gFmVPT)
By combining 3D printing and dealloying., researchers at LLNL have developed a method for fabricating metal foams with engineered hierarchical architectures consisting of pores at least 3 distinct length scales. LLNL’s method uses direct ink writing (DIW), a 3D printing technique for additive manufacturing to fabricate hierarchical nanoporous metal foams with deterministically controlled 3D…
![drift_meter_thumb.jpg drift_meter_thumb](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/drift_meter_thumb.jpg?itok=1NiNsyHm)
LLNL’s Optically-based Interstory Drift Meter System provides a means to accurately measure the dynamic interstory drift of a vibrating building (or other structure) during earthquake shaking. This technology addresses many of the shortcomings associated with traditional strong motion accelerometer based building monitoring.
LLNL’s discrete diode position sensitive device is a newly…
![Electronic Wave](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/electronic%20wave.jpg?itok=v7aKMJKH)
The invention relates to a measurement method and system for capturing both the amplitude and phase temporal profile of a transient waveform or a selected number of consecutive waveforms having bandwidths of up to about 10 THz in a single shot or in a high repetition rate mode. The invention consists of an optical preprocessor which can then output a time-scaled replica of the input signal to…
![energy_absorbing_material.jpg energy_absorbing_material](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/energy_absorbing_material.jpg?itok=UxNZ6nWH)
To overcome limitations with cellular silicone foams, LLNL innovators have developed a new 3D energy absorbing material with tailored/engineered bulk-scale properties. The energy absorbing material has 3D patterned architectures specially designed for specific energy absorbing properties. The combination of LLNL's capabilities in advanced modeling and simulation and the additive…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
Nanomaterials that are emerging out of cutting edge nanotechnology research are a key component for an energy revolution. Carbon-based nanomaterials are ushering in the "new carbon age" with carbon nanotubes, nanoporous carbons, and graphene nanosheets that will prove necessary to provide sustainable energy applications that lessen our dependence on fossil fuels.
Carbon aerogels (CAs)…
![Batteryless Sensor](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/batteryless%20sensor.jpg?itok=OiEAlv22)
Chemical and biological sensors based on nanowire or nanotube technologies exhibit observable ultrasensitive detection limits due to their unusually large surface-to-volume architecture. This suggests that nanosensors can provide a distinct advantage over conventional designs. This advantage is further enhanced when the nanosensor can harvest its meager power requirements from the surrounding…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
LLNL has developed novel nanoporous carbon materials for the surface-stress-induced actuator technology. The morphology of these materials has been designed to combine high surface area and mechanical strength. The process allows for the fabrication of large monolithic pieces with low densities and high structural integrity. One actuation technology relies on electrochemically- induced changes…