For this method, a Silicon on Insulator (SOI) wafer is used to tailor etch rates and thickness in initial steps of the process. The simple three step process approach is comprised of grayscale lithography, deep reactive-ion etch (DRIE) and liftoff of the SOI wafer. The liftoff process is used to dissolve the insulating layer, thus separating sections of the wafer as individual silicon…
Keywords
- Show all (62)
- Imaging Systems (9)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Semiconductors (6)
- Data Science (5)
- Cybersecurity (4)
- Optical Switches (4)
- Power Electronics (3)
- Sensors (3)
- Simulation (3)
- Analysis (2)
- Computing (2)
- Electric Grid (2)
- Optical Sensors (2)
- Spectrometers (2)
- Additive Manufacturing (1)
- Precision Engineering (1)
- (-) MEMS Sensors (2)
- (-) Particle Accelerators (2)
Technology Portfolios
![Cross Section of the High-Voltage Insulator Joint](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/HighVoltageInsulatorJoint.png?itok=afTeKYkH)
The approach is to build a high voltage insulator consisting of two materials: Poly-Ether-Ether-Ketone (“PEEK”) and Machinable Ceramic (“MACOR”). PEEK has a high stress tolerance but cannot withstand high temperatures, while MACOR has high heat tolerance but is difficult to machine and can be brittle. MACOR is used for the plasma-facing surface, while PEEK will handle the stresses and high…
![An artist’s concept rendering of a 3.5-meter linear induction accelerator (LIA) with four lines-of-sight toward a patient. The blue elements magnetically focus and direct the LIA’s electron beams.](/sites/default/files/styles/scale_exact_400x400_/public/2023-04/ArtistConceptofLIA.png?itok=Q2EzmJb1)
LLNL’s approach is to use their patented Photoconductive Charge Trapping Apparatus (U.S. Patent No. 11,366,401) as the active switch needed to discharge voltage across a vacuum gap in a particle accelerator, like the one described in their other patent (U.S. Patent No.
![microcantilever3.jpg microcantilever3](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/microcantilever3.jpg?itok=NKaBhMlG)
LLNL has developed a compact and low-power cantilever-based sensor array, which has been used to detect various vapor-phase analytes. For further information on the latest developments, see the article "Sniffing the Air with an Electronic Nose."