LLNL researchers have developed a method to enhance the performance of polyelectrolyte membranes by using a humidity-controlled crosslinking process which can be applied to precisely adjust the water channels of the membrane.
Keywords
- Show all (91)
- Additive Manufacturing (37)
- Synthesis and Processing (17)
- 3D Printing (7)
- Materials for Energy Products (6)
- Manufacturing Automation (2)
- Rare Earth Elements (REEs) (2)
- Additively Manufactured (AM) Optics (1)
- Electric Grid (1)
- Instrumentation (1)
- Magnet Compositions (1)
- Manufacturing Simulation (1)
- Material Characterization (1)
- Microfabrication (1)
- Precision Engineering (1)
- Sensors (1)
- Structural Materials (1)
- Volumetric Additive Manufacturing (1)
- (-) Material Design (4)
- (-) Manufacturing Improvements (3)
- (-) Membranes (2)
![Potential reactor configurations with printed TPMS scaffolds](/sites/default/files/styles/scale_exact_400x400_/public/2023-12/Reactor_Config_with_TPMS_scaffolds.png?itok=stDW7Z7n)
LLNL researchers have devised a set of design principles that facilitates the development of practical TPMS-based two fluid flow reactors.; included in the design are these new concepts:
![Filled (8,8) (left) and (15,15) (right) CNTs with [EMIM+][BF4- ] using SGTI with the proposed spliced soft-core potential (SSCP) approach](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/Filled%20CNTs%20using%20SGTI.png?itok=Dy0ObN7i)
LLNL researchers have developed a novel simulation methodology using slow growth thermodynamic integration (SGTI) utilizing spliced soft-core interaction potential (SSCP). The approach to filling the molecular enclosures is a nonphysical one. Rather than filling the pores from the open ends this method creates steps in the algorithm that allow molecules to pass through the pore wall and…
![A digital twin (right) is the virtual representation of real-world objects and processes (left)](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/DigitalTwin.jpg?itok=SkQtz1w4)
LLNL’s novel approach utilizes a number of techniques to improve reconstruction accuracy:
![A cold-spray chamber is shown during deposition, with the nozzle at the top of the image and a near-full density sample being fabricated in the center. Particles of the brittle thermoelectric bismuth telluride are accelerated to more than 900 meters per second, or almost Mach 3, in inert gas and directed onto a copper surface, laying down the strips that form the basis of a functioning thermoelectric generator to harvest waste heat. Graphic by Jacob Long/LLNL](/sites/default/files/styles/scale_exact_400x400_/public/2021-02/Cold%20Spray_875x500px.jpg?itok=hjM9UrWO)
![Intensification of laser in simulations and electrons being accelerated](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/intensification%20of%20laser%20in%20simulations%20and%20electrons%20being%20accelerated_875x500px.jpg?itok=bdZS_mHA)
LLNL pioneered the use of tomographic reconstruction to determine the power density of electron beams using profiles of the beam taken at a number of angles. LLNL’s earlier diagnostic consisted of a fixed number of radially oriented sensor slits and required the beam to be circled over them at a fixed known diameter to collect data. The new sensor design incorporates annular slits instead,…
![Nanoporus gold](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/nanoporus%20gold%20875x500.jpg?itok=A0gFmVPT)
By combining 3D printing and dealloying., researchers at LLNL have developed a method for fabricating metal foams with engineered hierarchical architectures consisting of pores at least 3 distinct length scales. LLNL’s method uses direct ink writing (DIW), a 3D printing technique for additive manufacturing to fabricate hierarchical nanoporous metal foams with deterministically controlled 3D…
![Second skin smart protection mechanism of responsive nanotube membranes against environmental threats](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/Second%20Skin%20with%20high%20breathability.png?itok=YhZHST7k)
LLNL researchers have developed an alternative route to protective breathable membranes called Second Skin technology, which has transformative potential for protective garments. These membranes are expected to be particularly effective in mitigating physiological burden.
For additional information see article in Advanced Materials “Ultrabreathable and Protective Membranes with Sub-5…
![energy_absorbing_material.jpg energy_absorbing_material](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/energy_absorbing_material.jpg?itok=UxNZ6nWH)
To overcome limitations with cellular silicone foams, LLNL innovators have developed a new 3D energy absorbing material with tailored/engineered bulk-scale properties. The energy absorbing material has 3D patterned architectures specially designed for specific energy absorbing properties. The combination of LLNL's capabilities in advanced modeling and simulation and the additive…