LLNL researchers have developed a method to enhance the performance of polyelectrolyte membranes by using a humidity-controlled crosslinking process which can be applied to precisely adjust the water channels of the membrane.
Keywords
- Show all (85)
- Additive Manufacturing (37)
- Electric Grid (8)
- 3D Printing (7)
- Carbon Utilization (6)
- Materials for Energy Products (4)
- Synthesis and Processing (4)
- Direct Air Capture (2)
- Manufacturing Automation (2)
- Power Electronics (2)
- Geologic Storage (1)
- Inertial Fusion Energy (IFE) (1)
- Manufacturing Simulation (1)
- Material Design (1)
- Microfabrication (1)
- Precision Engineering (1)
- Spectrometers (1)
- Volumetric Additive Manufacturing (1)
- (-) Manufacturing Improvements (3)
- (-) Membranes (1)
- (-) Simulation (1)
![A digital twin (right) is the virtual representation of real-world objects and processes (left)](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/DigitalTwin.jpg?itok=SkQtz1w4)
LLNL’s novel approach utilizes a number of techniques to improve reconstruction accuracy:
![Plasma wind](/sites/default/files/styles/scale_exact_400x400_/public/2022-08/Plasma%20wind%20.png?itok=RB5iLhMv)
![A cold-spray chamber is shown during deposition, with the nozzle at the top of the image and a near-full density sample being fabricated in the center. Particles of the brittle thermoelectric bismuth telluride are accelerated to more than 900 meters per second, or almost Mach 3, in inert gas and directed onto a copper surface, laying down the strips that form the basis of a functioning thermoelectric generator to harvest waste heat. Graphic by Jacob Long/LLNL](/sites/default/files/styles/scale_exact_400x400_/public/2021-02/Cold%20Spray_875x500px.jpg?itok=hjM9UrWO)
![Intensification of laser in simulations and electrons being accelerated](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/intensification%20of%20laser%20in%20simulations%20and%20electrons%20being%20accelerated_875x500px.jpg?itok=bdZS_mHA)
LLNL pioneered the use of tomographic reconstruction to determine the power density of electron beams using profiles of the beam taken at a number of angles. LLNL’s earlier diagnostic consisted of a fixed number of radially oriented sensor slits and required the beam to be circled over them at a fixed known diameter to collect data. The new sensor design incorporates annular slits instead,…
![multichannel_pyrometer.jpg multichannel_pyrometer](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/multichannel_pyrometer.jpg?itok=x0sCe_BN)
LLNL researchers have designed and tested performance characteristics for a multichannel pyrometer that works in the NIR from 1200 to 2000 nm. A single datapoint without averaging can be acquired in 14 microseconds (sampling rate of 70,000/s). In conjunction with a diamond anvil cell, the system still works down to about 830K.