LLNL researchers have invented an ultrafast PCSS to drive a high-power laser diode with arbitrary pulse widths. These devices operate by supplying a high voltage (>10 kV) to one side of the switch. A short pulse of light illuminates the semiconductor, instantly turning it from highly resistive to highly conductive.
Keywords
- Show all (62)
- Imaging Systems (9)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Cybersecurity (4)
- Optical Switches (4)
- Power Electronics (3)
- Sensors (3)
- Simulation (3)
- Analysis (2)
- Computing (2)
- Electric Grid (2)
- MEMS Sensors (2)
- Optical Sensors (2)
- Particle Accelerators (2)
- Spectrometers (2)
- Precision Engineering (1)
- (-) Semiconductors (6)
- (-) Data Science (5)
- (-) Additive Manufacturing (1)
![JFET Device Structure](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/JFET%20device%20structure.png?itok=NRzXbnhk)
LLNL’s novel approach is to use diamond substrates with the desired donor (nitrogen) and acceptor (boron) impurities. In order to optically activate these deep impurities, the invention requires at least one externally or internally integrated light source. The initial exposure to light can set up the desired conduction current, after which the light source could be turned off. Even with…
![Tunneling Diode between two DSRDs](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/TunnelingDiode.png?itok=DfeB26vp)
Instead of producing individual DSRDs and bonding them, Tunnel DSRD's entire stack structure is grown epitaxially on a n- or p-type silicon wafer, resulting in a novel, “monolithic” stacked DSRD. A tunnel diode is essentially a diode with very highly doped p and n regions such that the reverse breakdown voltage is 200 meV or lower.
![thermoelectric cooler (TEC) embedded substrate for cooling of high power devices](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/TEC%20embedded%20substrate.png?itok=vEz7ndQ8)
For cooling a high power device, the novel approach is to use a thermoelectric cooler (TEC)-based embedded substrate with proper selection of the TEC material as an active cooler. The packaging configuration of TEC allows cooling the entire die without the use of a fluid. The process is compatible with the thin film TEC material. Standard semiconductor processes can be used to manufacture…
![SEM image of a prototype for a neural implant shuttle etched into a non-SOI wafer. The 7:1 (Si:Photoresist) etch selectivity used here allowed for a maximum structure height of 32 μm, with up to 75 steps of 0.4 μm height each. Scale bar 100 μm.](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/SEM%20image%20prototype%20neural%20implant%20shuttle.png?itok=fpnfB5Yr)
For this method, a Silicon on Insulator (SOI) wafer is used to tailor etch rates and thickness in initial steps of the process. The simple three step process approach is comprised of grayscale lithography, deep reactive-ion etch (DRIE) and liftoff of the SOI wafer. The liftoff process is used to dissolve the insulating layer, thus separating sections of the wafer as individual silicon…
![Unique LLNL capabilities enable GaN superjunctions](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/GaNSuperjunctions.png?itok=UtrYddDz)
The approach is to use Charge Balance Layers (CBLs) to create a superjunction device in wide bandgap materials. These CBLs enable the device to effectively spread the electric field over 2- or 3-dimensions within a semiconductor voltage sustaining layer instead of 1-dimension, thereby increasing the maximum voltage a device is capable of withstanding. The challenge of using CBLs is the…
![AI Innovation Incubator](/sites/default/files/styles/scale_exact_400x400_/public/2022-01/AI%20Innovation%20Incubator.jpg?itok=B8jcKPOy)
Lawrence Livermore National Laboratory (LLNL) is offering the opportunity to collaborate in accelerating artificial intelligence (AI) for applied science, including research in key areas such as advanced material design, 3D printing, predictive biology, energy systems, “self-driving” lasers and fusion energy research.
![Catalyst HPC cluster](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/Catalyst%20HPC%20cluster.jpg?itok=k9uYS5xL)
Clinical images have a wealth of data that are currently untapped by physicians and machine learning (ML) methods alike. Most ML methods require more data than is available to sufficiently train them. In order to obtain all data contained in a clinical image, it is imperative to be able to utilize multimodal, or various types of, data such as tags or identifications, especially where spatial…
![medical_x-rays_x-ray_tech](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/medical_x-rays_x-ray_tech_1.jpg?itok=kn0J-DkH)
Some COVID-19 diagnoses are utilizing computed tomography (CT)-scans for triage. CT-scans produce immediate results with high sensitivity. The digital images produced by a CT-scan require physicians to identify objects within the image to determine the presence of disease. Object identification can be done using machine learning (ML) techniques such as deep learning (DL) to improve speed and…
![MimicGAN data set example](/sites/default/files/styles/scale_exact_400x400_/public/2020-05/mimicgan_robustness_to_rotation.png?itok=yacM18ra)
MimicGAN represents a new generation of methods that can “self-correct” for unseen corruptions in the data out in the field. This is particularly useful for systems that need to be deployed autonomously without needing constant intervention such as Automated Driver Assistance Systems. MimicGAN achieves this by treating every test sample as “corrupt” by default. The goal is to determine (a) the…
![multichannel_pyrometer.jpg multichannel_pyrometer](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/multichannel_pyrometer.jpg?itok=x0sCe_BN)
LLNL researchers have designed and tested performance characteristics for a multichannel pyrometer that works in the NIR from 1200 to 2000 nm. A single datapoint without averaging can be acquired in 14 microseconds (sampling rate of 70,000/s). In conjunction with a diamond anvil cell, the system still works down to about 830K.
![medical_x-rays_x-ray_tech](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/medical_x-rays_x-ray_tech_1.jpg?itok=kn0J-DkH)
LLNL has developed a new system, called the Segmentation Ensembles System, that provides a simple and general way to fuse high-level and low-level information and leads to a substantial increase in overall performance of digital image analysis. LLNL researchers have demonstrated the effectiveness of the approach on applications ranging from automatic threat detection for airport security, to…