LLNL researchers have developed a method to enhance the performance of polyelectrolyte membranes by using a humidity-controlled crosslinking process which can be applied to precisely adjust the water channels of the membrane.
Keywords
- Show all (208)
- Instrumentation (39)
- Additive Manufacturing (37)
- Sensors (16)
- Synthesis and Processing (16)
- Diagnostics (13)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Electric Grid (8)
- Imaging Systems (8)
- 3D Printing (7)
- Carbon Utilization (6)
- Compact Space Telescopes (5)
- Data Science (5)
- Laser Materials Processing (5)
- Therapeutics (5)
- Cybersecurity (4)
- Diode Lasers (4)
- Optical Switches (4)
- (-) Materials for Energy Products (7)
- (-) Semiconductors (6)
- (-) Material Design (4)
![Potential reactor configurations with printed TPMS scaffolds](/sites/default/files/styles/scale_exact_400x400_/public/2023-12/Reactor_Config_with_TPMS_scaffolds.png?itok=stDW7Z7n)
LLNL researchers have devised a set of design principles that facilitates the development of practical TPMS-based two fluid flow reactors.; included in the design are these new concepts:
![Custom PCB design of a PCSS Laser Diode Driver](/sites/default/files/styles/scale_exact_400x400_/public/2023-11/PCSS%20Laser%20Diode%20Driver.png?itok=WQ2FNHQF)
LLNL researchers have invented an ultrafast PCSS to drive a high-power laser diode with arbitrary pulse widths. These devices operate by supplying a high voltage (>10 kV) to one side of the switch. A short pulse of light illuminates the semiconductor, instantly turning it from highly resistive to highly conductive.
![JFET Device Structure](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/JFET%20device%20structure.png?itok=NRzXbnhk)
LLNL’s novel approach is to use diamond substrates with the desired donor (nitrogen) and acceptor (boron) impurities. In order to optically activate these deep impurities, the invention requires at least one externally or internally integrated light source. The initial exposure to light can set up the desired conduction current, after which the light source could be turned off. Even with…
![Filled (8,8) (left) and (15,15) (right) CNTs with [EMIM+][BF4- ] using SGTI with the proposed spliced soft-core potential (SSCP) approach](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/Filled%20CNTs%20using%20SGTI.png?itok=Dy0ObN7i)
LLNL researchers have developed a novel simulation methodology using slow growth thermodynamic integration (SGTI) utilizing spliced soft-core interaction potential (SSCP). The approach to filling the molecular enclosures is a nonphysical one. Rather than filling the pores from the open ends this method creates steps in the algorithm that allow molecules to pass through the pore wall and…
![Tunneling Diode between two DSRDs](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/TunnelingDiode.png?itok=DfeB26vp)
Instead of producing individual DSRDs and bonding them, Tunnel DSRD's entire stack structure is grown epitaxially on a n- or p-type silicon wafer, resulting in a novel, “monolithic” stacked DSRD. A tunnel diode is essentially a diode with very highly doped p and n regions such that the reverse breakdown voltage is 200 meV or lower.
![Livermore researchers support efforts to limit the need for rare-earth elements in U.S. clean-energy technologies.](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/Reducing%20Reliance%20on%20Critical%20Materials.png?itok=IuC6bH4r)
CMI—a DOE Energy Innovation Hub—is a public/private partnership led by the Ames Laboratory that brings together the best and brightest research minds from universities, national laboratories (including LLNL), and the private sector to find innovative technology solutions to make better use of materials critical to the success of clean energy technologies as well as develop resilient and secure…
![One embodiment of a solid-state lithium-air battery based on gyroid foams.](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/Li-Air%20Battery%20Gyroid%20Foam.jpg?itok=gPAwVj0O)
LLNL researchers have developed a new 3D printable lithium-air battery that uses a novel thin solid state ceramic electrolyte. LLNL’s invention overcomes the combined challenges of low power density and low cycle life in previously designed lithium-air batteries by using solid state electrolytes to achieve stability and multiscale structuring of the electrolyte to achieve low interfacial…
![thermoelectric cooler (TEC) embedded substrate for cooling of high power devices](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/TEC%20embedded%20substrate.png?itok=vEz7ndQ8)
For cooling a high power device, the novel approach is to use a thermoelectric cooler (TEC)-based embedded substrate with proper selection of the TEC material as an active cooler. The packaging configuration of TEC allows cooling the entire die without the use of a fluid. The process is compatible with the thin film TEC material. Standard semiconductor processes can be used to manufacture…
![SEM image of a prototype for a neural implant shuttle etched into a non-SOI wafer. The 7:1 (Si:Photoresist) etch selectivity used here allowed for a maximum structure height of 32 μm, with up to 75 steps of 0.4 μm height each. Scale bar 100 μm.](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/SEM%20image%20prototype%20neural%20implant%20shuttle.png?itok=fpnfB5Yr)
For this method, a Silicon on Insulator (SOI) wafer is used to tailor etch rates and thickness in initial steps of the process. The simple three step process approach is comprised of grayscale lithography, deep reactive-ion etch (DRIE) and liftoff of the SOI wafer. The liftoff process is used to dissolve the insulating layer, thus separating sections of the wafer as individual silicon…
![Unique LLNL capabilities enable GaN superjunctions](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/GaNSuperjunctions.png?itok=UtrYddDz)
The approach is to use Charge Balance Layers (CBLs) to create a superjunction device in wide bandgap materials. These CBLs enable the device to effectively spread the electric field over 2- or 3-dimensions within a semiconductor voltage sustaining layer instead of 1-dimension, thereby increasing the maximum voltage a device is capable of withstanding. The challenge of using CBLs is the…
![nanocomposite_aerogel.jpg nanocomposite_aerogel](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/nanocomposite_aerogel.jpg?itok=PuNPrvkg)
Livermore researchers have developed two novel TiCl4 based non-alkoxide sol-gel approaches for the synthesis of SiO2/TiO2 nanocomposite aerogels. Composite SiO2-TiO2 aerogels were obtained by epoxide-assisted gelation (EAG route) of TiCl4/DMF solution in the presence SiO2 aerogel particles. Additionally, the same TiCl4/DMF solution was employed to prepare SiO2@TiO2 aerogels by a facile one-…
![Nanoporus gold](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/nanoporus%20gold%20875x500.jpg?itok=A0gFmVPT)
By combining 3D printing and dealloying., researchers at LLNL have developed a method for fabricating metal foams with engineered hierarchical architectures consisting of pores at least 3 distinct length scales. LLNL’s method uses direct ink writing (DIW), a 3D printing technique for additive manufacturing to fabricate hierarchical nanoporous metal foams with deterministically controlled 3D…
![drift_meter_thumb.jpg drift_meter_thumb](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/drift_meter_thumb.jpg?itok=1NiNsyHm)
LLNL’s Optically-based Interstory Drift Meter System provides a means to accurately measure the dynamic interstory drift of a vibrating building (or other structure) during earthquake shaking. This technology addresses many of the shortcomings associated with traditional strong motion accelerometer based building monitoring.
LLNL’s discrete diode position sensitive device is a newly…
![Spectroscopic Injection Pulser prototype](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/Spectroscopic%20Injection%20Pulser%20prototype%20.jpg?itok=CQZmEGas)
The technology that is available has the capability to inject realistic radiation detection spectra into the amplifier of a radiation detector and produce the all the observables that are available with that radiation detection instrument; count-rate, spectrum, dose rate, etc.
The system uses the capability of LLNL to generate the source output for virtually any source and determine…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
Nanomaterials that are emerging out of cutting edge nanotechnology research are a key component for an energy revolution. Carbon-based nanomaterials are ushering in the "new carbon age" with carbon nanotubes, nanoporous carbons, and graphene nanosheets that will prove necessary to provide sustainable energy applications that lessen our dependence on fossil fuels.
Carbon aerogels (CAs)…
![Batteryless Sensor](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/batteryless%20sensor.jpg?itok=OiEAlv22)
Chemical and biological sensors based on nanowire or nanotube technologies exhibit observable ultrasensitive detection limits due to their unusually large surface-to-volume architecture. This suggests that nanosensors can provide a distinct advantage over conventional designs. This advantage is further enhanced when the nanosensor can harvest its meager power requirements from the surrounding…
![Electronic Wave](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/electronic%20wave.jpg?itok=v7aKMJKH)
The invention relates to a measurement method and system for capturing both the amplitude and phase temporal profile of a transient waveform or a selected number of consecutive waveforms having bandwidths of up to about 10 THz in a single shot or in a high repetition rate mode. The invention consists of an optical preprocessor which can then output a time-scaled replica of the input signal to…
![energy_absorbing_material.jpg energy_absorbing_material](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/energy_absorbing_material.jpg?itok=UxNZ6nWH)
To overcome limitations with cellular silicone foams, LLNL innovators have developed a new 3D energy absorbing material with tailored/engineered bulk-scale properties. The energy absorbing material has 3D patterned architectures specially designed for specific energy absorbing properties. The combination of LLNL's capabilities in advanced modeling and simulation and the additive…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
LLNL has developed novel nanoporous carbon materials for the surface-stress-induced actuator technology. The morphology of these materials has been designed to combine high surface area and mechanical strength. The process allows for the fabrication of large monolithic pieces with low densities and high structural integrity. One actuation technology relies on electrochemically- induced changes…