LLNL researchers have developed a method to enhance the performance of polyelectrolyte membranes by using a humidity-controlled crosslinking process which can be applied to precisely adjust the water channels of the membrane.
Keywords
- Show all (208)
- Additive Manufacturing (37)
- Sensors (16)
- Synthesis and Processing (16)
- Diagnostics (13)
- Photoconductive Semiconductor Switches (PCSS) (9)
- Imaging Systems (8)
- 3D Printing (7)
- Carbon Utilization (6)
- Semiconductors (6)
- Compact Space Telescopes (5)
- Data Science (5)
- Laser Materials Processing (5)
- Therapeutics (5)
- Cybersecurity (4)
- Diode Lasers (4)
- Material Design (4)
- (-) Instrumentation (39)
- (-) Electric Grid (8)
- (-) Materials for Energy Products (7)
- (-) Optical Switches (4)
![Diffuse discharge circuit breaker with latching switch](/sites/default/files/styles/scale_exact_400x400_/public/2024-02/Diffuse%20discharge%20circuit%20breaker.png?itok=qWpciEtY)
A thyristor will stay conducting until the current through the device is zero (“current zero”) or perhaps slightly negative. LLNL’s approach is to use the opticondistor (“OTV”) to force this current zero in order to force the device into an “off” state. By combining a light-activated thyristor with an OTV, a noise-immune, high efficiency, high-power switching device can be constructed. The…
![OALV design with High-k Photoconductor and High-k Optical Window](/sites/default/files/styles/scale_exact_400x400_/public/2024-01/OALV%20design.png?itok=xMV74hXb)
LLNL researchers has developed designs to augment WBG/UWBG-based OALVs to improve their power handling capability under CW operational environments. These designs include:
![LLNL energy grid protection device](/sites/default/files/styles/scale_exact_400x400_/public/2023-10/LLNL%20energy%20grid%20protection%20device_0.png?itok=vpqzRY_R)
The approach is to leverage the fact that a momentary “load” equal to the power transmission line impedance, (Z0), during the transient can suppress its propagation. Z(0) is typically a fixed impedance of several hundred ohms based on the geometry of most single wire transmission lines.
So, an isolated self-powered opticondistor (OTV) system may provide an ultrafast method of…
![Boss Circuit Breaker](/sites/default/files/styles/scale_exact_400x400_/public/2023-09/Boss%20Circuit%20Breaker.png?itok=7XJ44vZ0)
LLNL’s novel approach to enable MVDC power systems to operate safely is to develop a wideband gap bulk optical semiconductor switch (WBG BOSS) circuit breaker. For higher power, efficiency and temperature operation, vanadium-doped silicon carbide (V-doped SiC) appears to be the most promising basis for WBG BOSS circuit breaker (other dopants like aluminum, boron and nitrogen may further…
![Sub-device integrated with Main device of the flow battery (A) and a cross-section of the sub-device (B)](/sites/default/files/styles/scale_exact_400x400_/public/2023-09/Sub-device%20for%20flow%20battery.png?itok=72VMgGtP)
LLNL researchers has developed an approach to mitigate HER on the ‘plating’ electrode, which uses a sub-device as a rebalancing cell to restore electrolyte properties, including pH, conductivity, and capacity across the main device of the flow battery. This sub-device, which may need to be powered externally, has three major physical components: (1) a cathode electrode, (2) an anode electrode…
![Electrical grid](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/electricaGrid875x500px.jpg?itok=vKB8x1kB)
LLNL has developed a novel methodology for using commercially available automated sensors and actuators which can be deployed at scale in large appliances and plug-in EVs to provide as needed electric grid stabilization capabilities. The approach comprises of a population of voltage relays with a range of setpoints that would gradually reduce load as voltage falls. More severe voltage…
![Electrodeposition of Zn onto 3D printed copper nanowire (CuNW)](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/ElectrodepositionofZnon3dprintedCuNW.jpg?itok=2G2D1kt9)
Improving the active material of the Zn anode is critical to improving the practicality of Zn-MnO2 battery technology. LLNL researchers have developed a new category of 3D structured Zn anode using a direct-ink writing (DIW) printing process to create innovative hierarchical architectures. The DIW ink, which is a gel-based mixture composed of zinc metal powder and organic binders, is extruded…
![Livermore researchers support efforts to limit the need for rare-earth elements in U.S. clean-energy technologies.](/sites/default/files/styles/scale_exact_400x400_/public/2023-07/Reducing%20Reliance%20on%20Critical%20Materials.png?itok=IuC6bH4r)
CMI—a DOE Energy Innovation Hub—is a public/private partnership led by the Ames Laboratory that brings together the best and brightest research minds from universities, national laboratories (including LLNL), and the private sector to find innovative technology solutions to make better use of materials critical to the success of clean energy technologies as well as develop resilient and secure…
![Compared with conventional slurry-based film electrode manufacturing methods, dry laser powder bed fusion is promising in generating structured electrodes for high power, low cost lithium ion batteries](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/conventional%20vs%20laser%20PBF%20for%20electrodes.jpg?itok=4KG4KLlE)
To address many of the aforementioned challenges of manufacturing LIBs and SSBs, LLNL researchers have developed a number of inventions that offer proposed solutions for their components:
![One embodiment of a solid-state lithium-air battery based on gyroid foams.](/sites/default/files/styles/scale_exact_400x400_/public/2023-06/Li-Air%20Battery%20Gyroid%20Foam.jpg?itok=gPAwVj0O)
LLNL researchers have developed a new 3D printable lithium-air battery that uses a novel thin solid state ceramic electrolyte. LLNL’s invention overcomes the combined challenges of low power density and low cycle life in previously designed lithium-air batteries by using solid state electrolytes to achieve stability and multiscale structuring of the electrolyte to achieve low interfacial…
![Segments of transmission line lengths can be switched to open circuit (as shown) or shorted to the ground (not shown)](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/Segments%20of%20tranmission%20line%20lengths.png?itok=FF0qaBGw)
Design and construction of a photoconductive switch requires a diamond photoconductor illuminated by light of a certain excitation wavelength. The diamond material is specifically doped with substitutional nitrogen, which act as a source of electrons. The device architecture allows maximum light entering the aperture. The top and bottom electrodes are made of ultra wide band gap (UWBG)…
![Annular illumination on photo conductor by Conical Total Internal Reflection “CTIR” endcap](/sites/default/files/styles/scale_exact_400x400_/public/2023-05/CONIFR.png?itok=L4wSanXF)
The approach is to use a custom-designed frustrum and attach it to the optical fiber that connects to the PCSS. Light from the fiber enters the frustrum, spreads out, and enters the PCSS. Any unabsorbed light re-enters the frustrum and, because of its geometry, reflects back into the PCSS itself with only a negligible fraction escaping from the fiber. The shape of the novel frustrum is…
![polymerase chain reaction](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR.jpg?itok=64qkqjEl)
Solid-state distributed node-based rapid thermal cycler for extremely fast nucleic acid amplification (LLNL Internal Case # IL-12275, US Patent 8,720,209)
![PCR](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR%202.jpg?itok=5M0GJjRs)
Laser heating of aqueous samples on a micro-optical-electro-mechanical system (LLNL Internal Case # IL-11719, US Patents 8,367,976;
![E-coli](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/e%20coli.jpg?itok=eO_e-HGq)
LLNL researchers have designed a synthetic, concatemeric bacterial expression vector that expresses a protein sequence that can be digested into a single peptide. The synthetic protein is designed to be secreted outside E. coli cells, and therefore can be purified using a His-tag from the cell supernatant (thereby reducing the need to lyse the cells for purification).
![Cancer Research](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/cancer%20research.jpg?itok=VDudKLag)
LLNL scientists have created a technology that utilizes electrical means, instead of optical methods, to (1) provide label-free detection of droplet morphology; (2) manipulate droplet position through trapping and actuation; (3) track individual droplets in a heterogeneous droplet population; and (4) generate droplets with target characteristics automatically without optical intercession. The…
![LLMDA Microbial detection array](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microbial%20detection%20array_0.jpg?itok=FmMGS10y)
This device allows for observation of single cells encapsulated in droplets and provide the ability to recover droplets containing a cell of interest. This system provides the unique capability to monitor droplet contents from a few minutes to hours and overcome the limitations of the fluorescence activated cell sorting (FACS) in the purification of cell populations. The ability of this…
![3D nanometer-thin membrane for ultra-fast selective mass transport](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/3D%20nanometer-thin%20membrane.jpg?itok=nUXUHpy9)
This invention consists of a functionalized membrane (e.g. polyethylene glycol (PEG)) and osmosis or electric potential as a driving force. The PEG membrane provides high biological particles separation and prevents sample for clogging due to the strong hydration of functional polymers layer and their resistance to protein adsorption.
![liquid chromatography-triple quadrupole mass spectrometer](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/liquid%20chromatography-triple%20quadrupole%20mass%20spectrometer.jpg?itok=9FZuEKl_)
This invention is an improved chromatography device that utilizes the concept of a functionally graded material (FGM) for separation of components. The technology consists of a device that contains a FGM that is patterned to have a gradient in material properties (e.g. chemical affinity, surface chemistry, chirality, pore size, etc.) normal to the direction of flow of the mobile phase. The…
![Biochemical assay](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Biochemical%20assay.jpg?itok=M8SqhQDu)
The art described here incorporates a planar integrated optical system that allows for multiple biochemical assays to be run at the same time or nearly the same time. Briefly, each assay can include one or more tags (e.g. dyes, other chemicals, reagents) whose optical characteristics change based on chemical characteristics of the biological sample being tested.
![Cancer Research](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/cancer%20research.jpg?itok=VDudKLag)
This technology describes a method for partitioning fluid into “packets” between polymeric sheets. The fluid to be partitioned is introduced between two polymeric layers or within a polymeric channel and the layers are sealed together to form an array or sequence of individual milliliter to picoliter samples as shown in figure below. This approach allows a continuous flow of samples through…
![Center for Accelerator Mass Spectrometry (CAMS)](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/CAMS_22.jpg?itok=utr-BW6K)
LLNL researchers have developed a variation of AMS technology that improves sample preparation, analysis, and cost for AMS. The device involves depositing liquid samples on an indented moving wire and passing the moving wire through a combustion oven to convert the carbon content of samples to carbon dioxide gas in a helium stream. The gas is then directed via a capillary to a high efficiency…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
LLNL has invented a new high-throughput assay for sample separation that uses the vibrations of a piezoelectric transducer to produce acoustic radiation forces within microfluidic channels. The system includes a separation channel for conveying a sample fluid containing the different size particles, an acoustic transducer and a recovery fluid stream. The polymeric films containing the fluid…
![Sun](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/sun.jpg?itok=CeJUmZ6P)
LLNL researchers have developed an apparatus capable of measuring and recording ultraviolet radiation that uses the Schottky diode/ZnSe/metal type UV sensor. This device can detect both UV-A (320-400nm) and UV-B(280-320nm) radiation. The present invention can also measure and accumulate doses with good sensitivity, and it can also store and make available the readings to be downloaded for a…
![Microbial detection array generic](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Microbial%20Detection%20Array%20generic.jpg?itok=UwXlRNP_)
The invention developed by LLNL researchers proposes to use staged isotachophoresis to improve sample separation. One of the problems with isotachophoresis is that there is a tradeoff between the diameter of the separation column and the ability to isolate a species into a detectable band. For example, wider diameter channels run faster, but narrower channels provide better ability to isolate…
![Chlamydomonas Reinhardti alga cells](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Chlamydomonas%20Reinhardti%20alga%20cells.jpg?itok=k_U2Un4r)
LLNL researchers have devolved a technique to separate or purify samples using electrophoretic separation. This invention corrects the problem associated with pH changes by using the electrode, which contacts the sample, itself a high-conductivity electrolyte made of liquid or gel materials. This will keep the metal surface electrochemistry physically remote from the sample, while applying the…
![Breast Cancer Cells](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/breast%20Cancer%20Cells.jpg?itok=sPlgarpi)
Researchers at LLNL have developed a more efficient and cost-effective method and system for synthesizing a critical D-aminoluciferin precursor and related compounds. D-aminoluciferin is as active as luciferin and provides a free -NH2 group for functionalization to attach peptide sequences corresponding to the cleavage site of a protease. This allows for the synthesis of bioluminescent probes…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
LLNL's technology employs improved sorting strategies related to chip-based droplet sorting. This technology uses electromagnetic fields and non-contact methods to sort and identify monodispersed water-in-oil emulsion droplets in a microfluidic chip-based device. The system selects individual droplets from a continuous stream based on optical or non-optical detection methods as well as the…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
Researchers at LLNL have developed a method to passively sort individual microdroplet samples of uniform size based on stiffness and viscosity. Unlike electrical or optical methods for droplet sorting, this apparatus does not require a measurement step. Instead, particle separation occurs through changes in shearing forces determined by the stiffness of the particles in the microdroplet sample…
![Chlamydomonas Reinhardti alga cells](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Chlamydomonas%20Reinhardti%20alga%20cells.jpg?itok=k_U2Un4r)
LLNL researchers have created a method that uses isotachophoresis for the exclusion and or purification of nucleic acids. Isotachopheresis (ITP) is an electrophoretic separation technique that leverages a heterogeneous buffer system of disparate electrophoretic mobilities. The researchers created a transverse ITP system that offers high-throughput sample preparation as the amount of sample…
![PI looking into a microscope](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/loots2.jpg?itok=arPM2k-s)
The steady-state phenomenon generates thousands of microdroplets per second which is a problem when the stream of droplets needs to be slowed down or stopped. LLNL technology provides a method for generating and trapping microdroplets at a desired location and subsequently stopping the stream of microdroplets without droplet coalescence. These microdroplets can then be chemically reacted,…
![DNA](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/DNA.jpg?itok=ES9MRz5G)
The present invention uses magnetic fields to hold particles in place for faster DNA amplification and sequencing. This invention provides a method for faster DNA sequencing by amplification of the genetic material within microreactors, denaturing and de-emulsifying and then sequencing the material while retaining it in the PCR/sequencing zone by a magnetic field. Briefly, nucleic acid…
![DNA 2](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/DNA%202.jpg?itok=7jDqO6CD)
This invention is designed to sort and identify complex samples using parallel nucleic acid characterization. By isolating single or double stranded nucleic acids derived from complex samples, researchers can sequence previously unknown genetic material to identify novel viruses and organisms. The chip-based microfluidic system achieves this through microdroplet PCR amplification,…
![biosecurity petri dish](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/biosecurity%20petri%20dish.jpg?itok=nHRadA1E)
This technology is a photonic detection system developed by researchers at LLNL for the detection of biological or chemical threats with the intention of combining the collection, concentration and detection process onto a single platform. The present invention consists of a porous membrane containing flow-through photonic silicon crystals (see figure).
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
The described invention is a miniature fluidic device for separating particles suspended within a liquid sample that is introduced into the interior volume of the device. The device uses laminar flow and a combination of gravity and acoustic, electrophoretic, dielectrophoretic, and diffusion-based processes in concert to separate the different particle types and allow them to be collected…
![Lipid nanotube or nanowire](/sites/default/files/styles/scale_exact_400x400_/public/2020-08/Lipid%20nanotube%20or%20nanowire.png?itok=AUVsxBIy)
Researchers at LLNL have developed a nanotube sensor (single-walled or multi-walled carbon nanotubes) enclosed within a highly selective lipid bilayer that can detect variations in ion transport using signal amplification generated from the disruption of protein pores across the lipid layer. Changes in the device’s transistor current are recorded by an external circuit with high efficiency as…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
Researchers at LLNL have created a new technology for performing pumping and valving operations in microfabricated fluidic systems. Traditional microfabricated devices have some disadvantages that defeat the advantages of miniaturization. For example, they require high power and voltage, and they need specific fluids to work properly and to be broadly applicable. The technology described here…
![proteins on computer screen](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/proteins%20on%20computer%20screen.jpg?itok=uW0bxzl9)
![Autonomous detection, Bio watch, airborne detection](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/autonomous%20detection.jpg?itok=4hu1aQYK)
LLNL has a successful history of developing instruments for detecting and characterizing airborne pathogens. Often, aerosol characterizing instruments require highly focused particle beams with little or no transmission losses. In addition, they need to interface to the sampling environment with a very high sampling rate so that more aerosol particles can be collected and sensitivity can be…
![PCR](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR%202.jpg?itok=5M0GJjRs)
LLNL scientists have designed a rapid PCR technology that incorporates the use of microfluidic thermal heat exchanger systems and is comprised of a porous internal medium, with two outlet channels, two tanks, and one or more exchanger wells for sample receiving. The wells and their corresponding inlet channels are coupled to two tanks that contain fluid with cold and hot temperatures. A…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
LLNL has developed a new technology that provides a method for near-instantaneous heating of aqueous samples in microfluidic devices. The technology relates to a heating method that employs microwave energy absorption from a coincident low power Co-planar waveguide or microwave microstrip transmission line embedded in a microfluidic channel to instantaneously heat samples. The method heat…
![Instantaneous heating](/sites/default/files/styles/scale_exact_400x400_/public/2020-08/Instantaneous%20heating%20of%20droplets.png?itok=Se-3CRdu)
Researchers at LLNL have developed an instantaneous sample heating method to efficiently deposit thermal energy into a continuous stream or segmented microdroplets on a MOEMS device using an optimally low energy, commercially available CO2 laser. The device uses an ideal wavelength (absorption in the far infra-red (FIR) region (λ=10.6 μm)) to instantaneously heat fluidic partitions. The…
![polymerase chain reaction](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR.jpg?itok=64qkqjEl)
Researchers at LLNL have designed a new technology that allows the integration of a large bench-top thermal cycling instrument onto a miniaturized instrument. This instrument is powered and controlled by portable thumb-drive systems such as an USB. USB thumb-drives are commonly used to transfer data from the instrument onto a PC, however, in this new technology the thumb drive becomes the…
![polymerase chain reaction](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR.jpg?itok=64qkqjEl)
This technology describes a method for performing immediate in-line sample heating to promote the required chemical reactions for amplification, activation, or detection, depending on the thermodynamics of the particular assay involved. The basis of this technology is a method that employ microwave energy absorption to instantaneously heat fluidic partitions without heating the device itself…
![polymerase chain reaction](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/PCR.jpg?itok=64qkqjEl)
LLNL researchers have developed a new method for faster, more accurate, and precise thermal control for DNA amplification. This technology uses sensor-controlled nodes to monitor and cycle materials through a microfluidic heat exchanging system. Thermal energy travels from a power module through thermal electric elements to sample wells. Sensors coupled to each sample well monitor and respond…
![nanocomposite_aerogel.jpg nanocomposite_aerogel](/sites/default/files/styles/scale_exact_400x400_/public/2019-08/nanocomposite_aerogel.jpg?itok=PuNPrvkg)
Livermore researchers have developed two novel TiCl4 based non-alkoxide sol-gel approaches for the synthesis of SiO2/TiO2 nanocomposite aerogels. Composite SiO2-TiO2 aerogels were obtained by epoxide-assisted gelation (EAG route) of TiCl4/DMF solution in the presence SiO2 aerogel particles. Additionally, the same TiCl4/DMF solution was employed to prepare SiO2@TiO2 aerogels by a facile one-…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
Nanomaterials that are emerging out of cutting edge nanotechnology research are a key component for an energy revolution. Carbon-based nanomaterials are ushering in the "new carbon age" with carbon nanotubes, nanoporous carbons, and graphene nanosheets that will prove necessary to provide sustainable energy applications that lessen our dependence on fossil fuels.
Carbon aerogels (CAs)…
![Brain on a chip](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Brain%20on%20a%20Chip.jpg?itok=exfjEY1E)
Lawrence Livermore National Laboratory scientists have developed a signal enhancing microchip apparatus and method that enhances a microfluidic detector's limits by magnetically focusing the target analytes in a zone of optical convergence. In summary, samples are associated with magnetic nanoparticles or magnetic polystyrene coated beads and moved down the flow channels until they are trapped…
![Times Square](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Times%20Square.jpg?itok=qF3psbyA)
LLNL’s BioBriefcase is a compact and portable instrument capable of autonomously detecting the full spectrum of bioagents, including bacteria, viruses and toxins in the air. It uses the state of art technologies to collect, process, and analyze samples to detect, and identify genetic and protein signatures of bioagents.
![Medical Doc with lab coat](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/medical_300.jpg?itok=JmFWJAsB)
This technology uses either of two X-ray wave-front sensor techniques, Hartmann sensing and two-dimensional shear interferometry, both of which are capable of measuring the entire two-dimensional electric field, both the amplitude and the phase, with a single measurement. Capturing both the absorption and phase coefficients of the index of refraction can help to reconstruct the image.…
![Batteryless Sensor](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/batteryless%20sensor.jpg?itok=OiEAlv22)
Chemical and biological sensors based on nanowire or nanotube technologies exhibit observable ultrasensitive detection limits due to their unusually large surface-to-volume architecture. This suggests that nanosensors can provide a distinct advantage over conventional designs. This advantage is further enhanced when the nanosensor can harvest its meager power requirements from the surrounding…
![Electromechanical battery](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/Electromechanical%20battery.jpg?itok=vgNlfBIu)
The design calculations that have been performed in exploring the potentialities of LLNL's new approaches to flywheel energy storage have been built on existing and past LLNL flywheel programs, including a program aimed at flywheel systems for the bulk storage of electricity at utility scale. To achieve the requirements of such systems, as mentioned above, LLNL has developed some key new…
![Microbial Detection Array 2](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/Microbial%20Detection%20Array%202.jpg?itok=ny4aLQbM)
LLNL has developed a technology that provides near-instantaneous heating of aqueous samples in microfluidic devices. The method heats samples in a focused area within a microfluidic channel on miniaturized chips. The microwave heating device is composed of a waveguide or microstrip transmission line embedded in a microfluidic channel. Aqueous solution microwave heating allows extremely fast…
![OTV Image](/sites/default/files/styles/scale_exact_400x400_/public/2022-02/OTV%20Image.png?itok=KEAmHqpM)
The Optical Transconductance Varistor (OTV, formerly Opticondistor) overcomes depletion region voltage limitations by optically exciting wide bandgap materials in a compact package. A 100μm thick crystal could have the capability approaching 40kV and would replace numerous equivalent junction devices. Thus, unlike present junction transistors or diodes, this wide bandgap device can be stacked…
![Microfluidics](/sites/default/files/styles/scale_exact_400x400_/public/2022-07/microfluidics.jpg?itok=MUle0chv)
The biotech industry aims to move towards an on-chip system for sample generation, amplification and detection of both DNA and RNA based organisms. LLNL has invented a new way of isolating samples in a system.
This invention enables creation of partitioned fluid "packets" between polymeric sheets for chemical separation, DNA amplification or PCR-based DNA detection. The polymeric…
![ccms-water-splitting](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/ccms-water-splitting.jpg?itok=CWvKEEmZ)
Dubbed the "LLNL Chemical Prism", the LLNL system has use wherever there is a need to separate components of a fluid. A few examples include:
- Chemical detection for known and previously unknown chemicals or substances
- Separation of biomolecules from a cellular extract
- Fractionation of a complex mixture of hydrocarbons
- Forensic analysis of…
![3D printed electrodes](/sites/default/files/styles/scale_exact_400x400_/public/2022-06/3D%20printed%20electrodes.jpg?itok=HPvcODM8)
LLNL has developed novel nanoporous carbon materials for the surface-stress-induced actuator technology. The morphology of these materials has been designed to combine high surface area and mechanical strength. The process allows for the fabrication of large monolithic pieces with low densities and high structural integrity. One actuation technology relies on electrochemically- induced changes…